This is my plan:
1.)Sand it down with 120 grit sandpaper to remove finish
2.)Put wood filler, if needed to fill cracks/dents
3.)Wipe guitar down with damp rag to clean it from dust/dirt
4.)Hang guitar from a wire
5.)Add coat of primer
6.)Sand guitar down with 800 grit with wet sand paper then add another coat of primer
7.)Spray 6 coats of paint (wait 15 minutes between each coat)
8.)Spray 10 coats of clear coat (let it sit for 48 hours)
9.)Sand guitar with 800 wet sand paper again
10.)Put parts back in guitar
Sound good? I used
This as a guide.